EMKO ESM-3712-HCN 2-point temperature controller with heating or cooling function and two outputs
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 2
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 3
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 4
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 5
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 6
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 7
EMKO ESM-3712-HCN 2-Punkt Temperaturregler mit Heiz- oder Kühlfunktion und zwei Ausgängen - Image 8

EMKO ESM-3712-HCN 2-point temperature controller with heating or cooling function and two outputs

from 58,85 € plus VAT.

Stock variants
24 V AC/DC | Pt100 | 2x relays: 5 pieces in stock
230 V AC | type J | 2x relays: 7 pieces in stock
230 V AC | type K | 2x relay: 3 pieces in stock
230 V AC | Pt1000 | 2x relay: 2 pieces in stock
10 to 30 V DC | type J | 2x relays: 2 pieces in stock
10 to 30 V DC | type K | 2x relay: 1 piece in stock
10 to 30 V DC | PTC | 2x relay: 1 piece in stock
SKU: 102339 Category: Manufacturer: EMKO ElectronicsCountry of origin: TRCustoms tariff number: 90321020

Description

EMKO ESM-3712-HCN 2-point temperature controller with heating or cooling function and two outputs

3-digit programmable temperature controller for heating or cooling applications with process control output, alarm output and buzzer for alarm values.

Features

  • 4-digit display
  • Type J, type K, Pt100, Pt1000, NTC or PTC input (must be specified in the order)
  • Selectable heating or cooling function
  • Selection of operation with hysteresis
  • Adjustable temperature offset
  • Process setpoint lower and upper limits
  • Selection of compressor operation: continuous operation, stop or intermittent operation in the event of a sensor fault
  • Compressor protection delays
  • Alarm parameters
  • Alarm setpoint adjustable from the front
  • Adjustable internal buzzer depending on sensor defect status and alarm status
  • Password protection for the programming section
  • Installation parameters using Prokey
  • Remote access, data acquisition and control with Modbus RTU
  • 2-point temperature control
  • 2 outputs for compressor and alarm control elements

Data sheet

Data sheet English

Operating instructions

Instructions Multilingual

Additional information

Supply voltage

10 to 30 V DC, 24 V AC/DC, 230 V AC
Sensor input

NTC, Pt100, Pt1000, PTC, type J, type K
Device type

2-point controller
Switch output

2x solid state relays, 2x relays
Interface

RS485
Function

Heating, cooling

Matching products ...