The + wire of the temperature sensor is connected to the + temperature sensor connection on the controller. The - wire of the temperature sensor is connected to the - temperature sensor connection on the controller. Furthermore, the...
Pre-assembled stranded wire, total number of poles: 2, grid dimension: 2.54 mm at Conrad Electronic. https://www.conrad.de/de/p/tru-components-konfektionierte-litze-polzahl-gesamt-2-rastermass-2-54-mm-741213-1-st-1570820.html
RealView software. The instrument is listed as DPM812/22.
If switching between voltage and current, the voltage measurement input must be interrupted when switching to current, otherwise a current value will be displayed even though no current is flowing.
The RS232 interface is triggered once to activate it and sends data until it is triggered again. 1x trigger = RS232 interface sends data 1x trigger = RS232 interface sends...
Left potentiometer: DC (V) calibration Right potentiometer: AC (V) calibration
7922 and 7932 use an EEPROM to save the programming and count values. This is done by monitoring the meter's internal power supply. If the external supply voltage is switched off, the...
Counting with neutral conductor: Connection: Bridge terminal 3/4 Ch-A/B and terminal 2 (0 V) Programme: nPnPnP = 0 NPN Counting with positive conductor: Connection: Bridge terminal 3/4 Ch-A/B and terminal 1 (+V)...
