Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-point controller 10 to 30 V DC Type K
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 2
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 3
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 4
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 5
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 6
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 7
Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-Punkt Regler 10 bis 30 V DC Typ K - Image 8

Emko ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0 2-point controller 10 to 30 V DC Type K

91,49 € plus VAT.

1 in stock (can be backordered)

SKU: 102356 Category: MPN: ESM-3712-HCN.8.10.0.1/01.00/2.0.0.0EAN: 2050006622636 Brand: GTIN: 2050006622636Manufacturer: EmkoCountry of origin: TRCustoms tariff number: 90321020Distrelec item number: 302-83-073

Description

EMKO ESM-3712-HCN 2-point temperature controller with heating or cooling function and two outputs

3-digit programmable temperature controller for heating or cooling applications, with a process control output, an alarm output and a buzzer for alarm values.

Features

  • 4-digit display
  • Type J, Type K, Pt100, Pt1000, NTC or PTC input (must be specified when ordering)
  • Selectable heating or cooling function
  • Selection of operating mode with hysteresis
  • Adjustable temperature offset
  • Process setpoint lower and upper limits
  • Selection of compressor operating mode: continuous operation, stop or intermittent operation in the event of a sensor fault
  • Compressor protection delays
  • Alarm parameters
  • Alarm setpoint adjustable from the front panel
  • Adjustable internal buzzer depending on the sensor fault status and alarm status
  • Password protection for the programming section
  • Installation parameters using Prokey
  • Remote access, data acquisition and control using Modbus RTU
  • 2-point temperature control
  • 2 outputs for compressor and alarm control elements

Data sheet

Data sheet English

Operating instructions

Multilingual Instructions

Additional information

Supply voltage

10 to 30 V DC
Interface

PRO-485 RS485 Expansion Module
Product type

2-point controller
Output

Relay
Sensor input

Type K

Product safety