TDE Instruments Digalox® DPM72-MPPV process display with 2 measurement inputs for 10 V analogue signals

Process indicator Built-in instrument for 0/2 to 10 V with graphic display, RGB backlighting

Graphical measuring device for electrical variables and process display with RGB backlighting - individual, innovative and multifunctional.

The measurement type analogue signal 0/2 to 10 V DC is supported at two measurement inputs. Up to four parameters can be displayed simultaneously via the multiple display and threshold values can be provided with individual colour warnings. The device can be switched between the individual measuring functions during operation using a switching contact.

Minimum and maximum values are recorded and can be displayed and reset using a jumper or external switch. The device records measured values over a period of three minutes to 14 days. The time range and the display of the graph of the measured values can be changed using an external switch. The values remain stored as long as the device is supplied with power.

The following parameters can be configured using the associated configuration software: Scale deflection, scale labelling, display design (pointer, tachometer, bar, etc.), start graphic, illumination colour, threshold values for the alarm outputs, colour warning per threshold value (illuminated or flashing), hysteresis and much more. The measured values in the measurement memory can be read out via software and continuous measured value transmission can be activated. The measured values can be analysed graphically within the software and exported as a CSV file.

Further information and software download at www.digalox.de