TDE Instruments DPM802-TW Digital Current and Voltage Meter AC/DC for Battery Operation
Description
Discontinued model
Successor model DPM36-AV
https://tde-instruments.de/shop/digitale-einbauinstrumente/tde-instruments-dpm36-4-stelliges-digitales-multimeter-einbauinstrument/
TDE Instruments DPM802-TW digital voltmeter and ammeter, panel-mounted instrument, up to 300 V and 10 A
Digital multimeter Built-in instrument for use as Voltmeter or Ammeter with measurement inputs for current and voltage, for use as a voltmeter and ammeter, featuring white backlighting and a linear bar graph display. Measurements can be taken for either AC or DC.
This digital panel metre features automatic range switching with a voltage measurement range of 400 mV to 300 V AC or DC when used as a voltmeter, and a selectable current measurement range of 1 µA to 10 A AC or DC when used as an ammeter. Minimum and maximum values are stored and can be retrieved. The supply voltage for this digital panel meter is 5 V to 16 V DC. This meter is equipped with an RS-232 interface for remote retrieval of measurement data.
Features
- 3 3/4-digit display and linear bar graph display
- Voltage measurement range from 1 mV to 300 V AC/DC
- Automatic range switching at 400 mV, 4 V, 40 V, 300 V
- Current measurement range: 1 µA to 10 A AC/DC
- Measuring range selectable via jumpers: 1 µA–4000 µA, 0.1 mA–400 mA and 0.1 A–10 A
- Display of minimum and maximum voltage
- Low battery warning indicator
- RS-232 interface for data retrieval
- Front panel dimensions: 72 x 36 mm
- Connections via a 3-way 5 mm screw terminal
- Designed for 9 V battery operation
FAQ
Potentiometer Links: DC (V) Calibration
Right-hand potentiometer AC (V) calibration
The RS232 interface is triggered once to activate it and continues to send data until it is triggered again.
1x trigger = RS232 interface sends data
1x trigger = RS232 interface no longer sends any data
If you switch between voltage and current measurement, the voltage measurement input must be disconnected when switching to current measurement; otherwise, a current value will be displayed even though no current is flowing.
RealView software. The instrument is listed as DPM812/22.
Additional information
| Supply voltage category | V/DC |
|---|---|
| Interface Category | RS232 |
| Reading angle | at the front and top, at the front and bottom |
| Trade fair entry category | Voltage, current |
