TDE Instruments Digalox® DPM72-MPP process display with 2 measurement inputs for 4–20 mA and 10 V analogue signals

Process indicator panel-mounted instrument for 0/2 to 10 V and 0/4 to 20 mA with graphic display and RGB backlighting

Graphical measuring instrument for electrical parameters and process display with RGB backlighting – customisable, innovative and multifunctional.

The following measurement modes are supported: analogue signals 0/2 to 10 V and 0/4 to 20 mA DC. The multi-display allows up to four parameters to be shown simultaneously, and threshold values can be assigned individual colour warnings. During operation, the device can be switched between the individual measurement functions via a switch contact.

Minimum and maximum values are recorded and can be displayed and reset using a jumper or an external switch. The device records measured values over a period ranging from three minutes to 14 days. The time range and the display of the trend graph for the measured values can be switched using an external switch. The values remain stored as long as the device is powered.

The following parameters can be configured using the accompanying configuration software: scale range, scale labelling, display design (pointer, speedometer, bar, etc.), start-up graphic, backlight colour, threshold values for the alarm outputs, colour warning per threshold value (steady or flashing), hysteresis and much more. The software can be used to read out measured values from the data logger and to activate continuous data transmission. The measured values can be analysed graphically within the software and exported as a CSV file.

Further information and software downloads are available at www.digalox.de